1. Home
  2. High-Speed Rail in California
  3. Project Sections
  4. Burbank to Los Angeles

Burbank to Los Angeles

The Burbank to Los Angeles project section connects two key multi-modal transportation hubs, the Hollywood Burbank Airport and Los Angeles Union Station (LAUS), providing an additional link between Downtown Los Angeles, the San Fernando Valley and the State.

The approximately 14-mile project section proposes to utilize the existing railroad right-of-way to the greatest extent possible, adjacent to the Los Angeles River, through the cities of Burbank, Glendale and Los Angeles with proposed stations near the Hollywood Burbank Airport and at LAUS.

 

SECTION HIGHLIGHTS

  • Integral part of Southern California’s Urban Rail Corridor providing a link between Los Angeles and the statewide transportation network.
  • Burbank Airport Station will be within walking distance of the Hollywood Burbank Airport Replacement Terminal, providing the first air to high-speed rail (HSR) connection in the United States.
  • Uses next generation signaling technology (Positive Train Control, intrusion barriers, earthquake early warning system, and more) to enhance performance while reducing pollution, noise, and congestion along the corridor.
  • Improves safety and reliability for vehicles, pedestrians, and cyclists with new grade separations.
  • Reduces greenhouse gas emissions and decreases traffic congestion.
  • Provides economic and employment benefits for the community, region, and state.
  • Connects employees and employers.
Portion of Burbank to Los Angeles project section map
Burbank to Los Angeles Project Section Map

SECTION DETAILS

Project Section Updates

On January 20, 2022, the California High-Speed Rail Authority’s (Authority) Board of Directors approved the Final Environmental Impact Report/Environmental Impact Statement (EIR/EIS) for the approximately 14-mile Burbank to Los Angeles project alignment section. The action paves the way for full CEQA (California Environmental Quality Act) environmental clearance of nearly 300 miles of the high-speed rail project’s 500-mile Phase 1 alignment from San Francisco to Los Angeles/Anaheim.

The next steps under CEQA and the National Environmental Policy Act (NEPA) will include the issuance of a Record of Decision consistent with NEPA requirements and the filing of a CEQA Notice of Determination. The Final EIR/EIS can be found on the Authority’s website here:  https://hsr-test.hsr.ca.gov/programs/environmental-planning/project-section-environmental-documents-tier-2/burbank-to-los-angeles-project-section-draft-environmental-impact-report-environmental-impact-statement/

The Authority is committed to keeping stakeholders and the public up to date on the latest on the high-speed rail program, and the latest updates happening in the regions. To sign up for project section updates, visit the Contact Us page and select Northern California, Central Valley or Southern California. Visit the Information Center to learn more about the Bakersfield to Palmdale project section in the regional and project section factsheets. Visit BuildHSR for the latest on construction progress.

Maps

Newsletters & Factsheets

Newsletter

The Authority releases quarterly regional newsletters to keep stakeholders and the public up to date on the high-speed rail program.

To sign up for the newsletter, complete the form on the Contact Us page and select “Southern California” from the dropdown menu.

View the most recent Southern California Regional Newsletter.

Factsheets

Visit the Factsheets page to learn more about California High-Speed Rail and to view the Authority’s factsheets.

To learn more about the Burbank to Los Angeles project section, please see the following factsheets.

Burbank to Los Angeles Project Section

Burbank to LA ThumbnailThe Burbank to Los Angeles Project Section will connect two key multimodal transportation hubs, the Hollywood Burbank Airport and Los Angeles Union Station (LAUS), providing an additional link between Downtown Los Angeles, the San Fernando Valley, and the State.

Environmental Review

The State of California and the federal government both require a proposed infrastructure project to undergo an extensive assessment of the project’s potential impacts on the environment – land, air, water, minerals, plants, animals and noise – and proposed actions to avoid or mitigate those impacts, if feasible.

Decisions regarding how and where to build the California high-speed rail system are made and justified by using detailed environmental studies and public comments on the potential environmental impacts of the proposed rail system and routes.

The materials listed under the Documents & Reports section below include studies and reports the Authority has produced to date, along with corresponding public comments received, during the environmental review process of the Bakersfield to Palmdale project section.

The environmental review, consultation, and other actions required by applicable Federal environmental laws for this project are being or have been carried out by the State of California pursuant to 23 U.S.C. 327 and a Memorandum of Understanding dated July 23, 2019, and executed by the Federal Railroad Administration and the State of California. Under that MOU, the Authority is the project’s lead agency under NEPA.

Documents & Reports

The following documents are available for review upon request. The Authority encourages written requests submitted via our Public Records Portal.

  • Burbank to Los Angeles Project Section Supplemental Alternatives Analysis
  • Burbank to Los Angeles Project Section Scoping Report
  • Burbank to Los Angeles Project Section Notice of Intent/Notice of Preparation

Contact Information

If you are interested in inviting the Authority to your community meeting to receive a project update, the team would be happy to coordinate with you.

(213) 457-8420
southern.california@hsr.ca.gov

Visit the Contact Us page to sign up for e-mail alerts and for additional contact information.

Map Icon INTERACTIVE MAPS

Interactive Alignment and Construction Map

  

PROJECT SECTION ENVIRONMENTAL DOCUMENTS 

San Francisco to San Jose Project Section: Draft Environmental Impact Report/Environmental Impact Statement San Francisco to San Jose: Revised Draft Environmental Impact Report/Supplemental Draft Environmental Impact Statement San Jose to Merced Project Section: Draft Environmental Impact Report/Environmental Impact Statement Bay Area to Central Valley: Partially Revised Final Program EIR Merced to Fresno: Final EIR/EIS Merced to Fresno: Central Valley Wye: Draft Supplemental EIR/EIS Merced to Fresno: Central Valley Wye Revised Draft Supplemental EIR/Second Draft Supplemental EIS Merced to Fresno: Central Valley Wye Final Supplemental Environmental Impact Report/Environmental Impact Statement Fresno to Bakersfield: Final EIR/EIS Fresno to Bakersfield: LGA Draft & Final EIR/EIS Bakersfield to Palmdale: Draft Environmental Impact Report/Environmental Impact Statement Bakersfield to Palmdale: Revised Draft Environmental Impact Report/Supplemental Draft Environmental Impact Statement Bakersfield to Palmdale: Final Environmental Impact Report/Environmental Impact Statement Burbank to Los Angeles: Draft Environmental Impact Report/Environmental Impact Statement Burbank to Los Angeles: Final Environmental Impact Report/Environmental Impact Statement

Get up to speed at BuildHSR.com

All the latest information on what's happening and where as we build California's high-speed rail

The California High-Speed Rail Authority makes every effort to ensure the website and its contents meet mandated ADA requirements as per the California State mandated Web Content Accessibility Guidelines 2.0 Level AA standard. If you are looking for a particular document not located on the California High-Speed Rail Authority website, you may make a request for the document under the Public Records Act through the Public Records Act page. If you have any questions about the website or its contents, please contact the Authority at info@hsr.ca.gov.